Analog & Mixed Signal / power management IP Core

The WEA3610LD45G is a voltage feedback amplifier (series – shunt) which active part is comprised of a telescopic cascode amplifier stage, followed by ...

102

3.0

Over-Voltage Protection Module

OPM-Angel-AR-1.9-5.5-2.6.02_TSMC_40_LP is a Over-voltage Protection Module companion in TSMC 40LP to handle direct connection of voltage regulators to...

103

2.2581

2 separated LDO blocks IP ISTS_LDO2CH_S40V33

The ISTS_LDO2CH_S40V33 IP includes 2 separated LDO blocks to generate the power for PLL and 2.5V analog power application....

104

2.2581

150mA Capaless LDO for MCU Application

150mA Capaless LDO for MCU Application...

105

2.2581

Very low power IP with BOR/POR features embedded

The IST-POR02 IP is a very low power IP with BOR/POR features embedded. It detects the voltage level of core power DVDD and IO power AVDD. When AVDD r...

106

2.2581

Very low power IP with VDT/POR features embedded

The IST-POR05 IP is a very low power IP with VDT/POR features embedded. It detects the voltage level of IO power AVDD and core power. When AVDD rises ...

107

2.2581

Always on LDO IP IST-LDO33T15

The IST-LDO33T15 IP is a always on LDO to generate the power for Fuse, PLL, etc. application....

108

2.2581

Always on Ultra Low Power LDO

The IST-ULPLDO33T15 IP is a always on Ultra Low Power LDO to generate the power for Fuse, PLL, etc. application....

109

2.0

Bandgap Voltage Reference, Bandgap Current Reference

The agileBandGapGP consists of a bandgap reference core together with a bandgap reference voltage generator (VREF), VREF replica current generators an...

110

2.0

Cap-less 100mA Low Noise LDO, XFAB 250nm

The LDO is capable of outputting 1.2V voltage with maximum power of 100mA and low drop out voltage of less than 200mV. The IP is fabricated in XFAB 25...

111

2.0

Cap-less 25mA Low Noise LDO, Fujitsu 90nm

The AR25F01 is a mass-production proven cap-less LDO IP. It is capable of outputting 1.2V voltage with maximum power of 20mA and low drop out voltage ...

112

2.0

High performance 1.8V reference current and voltage generator

The ODT-REF-16FFCT-SV1P8 is a high-performance reference current and voltage generator. The block incorporates a proprietary architecture to achieve h...

113

2.0

Combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode in GF 22FDX

RAR-eSR-qLR-OV-LB-ref-1.9-5.5-0.5-3.3.08a_GF_22_FDX is a Retention Alternating Regulator in GF 22FDX combining two regulation sub-components: a high-e...

114

2.0

Combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode in TSMC 40LPeF

The RAR-eSR-qLR Retention Alternating Regulator combines two regulation sub-components: a high-efficiency switching regulator (eSR) and an ultra low q...

115

2.0

Power Detector 22GHz to 44GHz

The WEA2244PD45G is a microwave signal envelope detector. It is capable of detecting signals in the range of -1 dBm to 20 dBm with an accuracy of +/-0...

116

2.0

Power-OK Monitor

The agilePOK is a Power-OK monitor that consists of a voltage reference and comparators to set a programmable high and low threshold level for power s...

117

1.0

2-channel capacitor-free LDO total solution

...

118

1.0

5.0V/3.3V-->3.3V/1.5V capacitor-free regulator

Supports capacitor-less application with fast transient; Typical output 1.50V, output range is from 1.40V to 1.65V; 200mA driving ability...

119

1.0

1.2V to 0.75V Linear Voltage Regulator

The LDO provides 0.75V regulated output voltages. It consists of a BGR, regulator cores and LVD. It can deliver up to 900mA. The operational junction ...

120

1.0

1.2V to 0.85V Linear Voltage Regulator

The low-dropout regulator provides 0.85V regulated output voltage. It consist of a regulator core and a buffer. It can deliver up to 200mA. The operat...

121

1.0

3.3V to 1.8V Linear Voltage Regulator

The linear voltage regulator provides 1.8V regulated voltage. It consists of a voltage regulator and a reference generator. It can deliver up to 350mA...

122

1.0

3.3V-->1.5V capacitor-free LDO

...

123

1.0

3.3V-->1.5V ultra-low power LDO

...

124

1.0

1.8V to 0.75V Linear Voltage Regulator

The linear voltage regulator provides 0.75V regulated voltage. It consists of a voltage regulator and a reference generator. It can deliver up to 80mA...

125

1.0

0.8V to 0.75V Low-Dropout Voltage Regulator

The digital low-dropout regulator provides 0.75V regulated output voltage. It consist of a global controller and 16 local LDOs. It can deliver up to 6...

126

1.0

1.8V to 0.8V Linear Voltage Regulator

The linear voltage regulator provides 0.8V regulated voltage. It consists of a voltage regulator and a reference generator. It can deliver up to 100mA...

127

1.0

1.8V to 1.0V Linear Voltage Regulator

The linear voltage regulator provides 1.0V regulated voltage. It consists of a voltage regulator and a reference generator. It can deliver up to 50mA....

128

1.0

1.8V to 1.2V Linear Voltage Regulator

The linear voltage regulator provides 1.2V regulated output voltage. It consists of a regulator core and a reference generator. It can deliver up to 1...

129

1.0

50mA CMOS buck regulator

The OT1150t180_50mA is a 50mA CMOS buck regulator designed for use in a wide variety of mixed signal device applications. Input range is 3V-5.5V and o...

130

1.0

15.5nA Current Bias with Enable - Ultra Low Voltage (0.9V), Ultra Low Power (50nW) Silterra 0.18 μm

This macro-cell is an ultra low power general purpose current bias generator core designed for SilTerra 0.18µm CL180G CMOS technology. The circuit gen...

131

1.0

17nA Current Bias with Enable - Low Voltage (1.0V), Ultra Low Power (90nW @ 1.8V) TowerJazz 0.18 μm

This macro-cell is a low power general purpose current bias generator core designed for TowerJazz 0.18µm TS18SL CMOS technology. The circuit generate...

132

1.0

Bandgap Reference 1.2V Output

Bandgap Reference 1.2V Output...

133

1.0

Capacitor-less Low Dropout regulator (LDO) 30 mA output

The ICPMLDO101_GF22FDX is capacitor-less linear voltage regulator in GF 22nmFDX. The LDO operates for a single input voltage in the range 1.4V to 1.9V...

134

1.0

IBM 65nm 3.3v-1.0v Power Regulator

This IP is a 3.3V to 1.0V power regulator in IBM 65nm 1.0V/2.5V process. It supports a large Vdd range (1.62V~3.6V) and a large output capacitance ran...

135

1.0

IBM 65nm LPE 3.3V/1.2V Power On Reset

The present Power-On-Reset circuit generates system reset pulses (RST) when both the 3.3V and 1.2V power suppliers are turned on. The output signals R...

136

1.0

IBM 65nm SF 3.3V Power on Reset

The present Power-On-Reset circuit generates system reset pulses (RST) when the 3.3V power supplier is turned on. The output signal RST33 is positive ...

137

1.0

IBM 65nm SF 3.3V/1.0V Power on Reset

The present Power-On-Reset circuit generates system reset pulses (RST) when both the 3.3V and 1.0V power suppliers are turned on. The output signal RS...

138

1.0

Adaptive Body Bias Generator

The adaptive body bias generator (ABBG) consists of a positive-BBG and a negative-BBG for FDSOI-MOS transistors. The ABBG is used for either Reverse B...

139

1.0

LDO regulator in SMIC 40nm, 0.6~1.1v output

The present IP is a low dropout voltage regulator, which can support 10uA current load. The input voltage is 2.7-3.6V (typical: 3.3V). Its output volt...

140

1.0

LDO regulator in SMIC 40nm, 1.13v output

The present IP is a low dropout voltage regulator, which can support 10uA DC current load. The input voltage is 2.7-3.6V (typical: 3.3V). Its output v...

141

1.0

LDO regulator in SMIC 40nm, 1.42v output

The present IP is a low dropout voltage regulator, which can support 10uA DC current load. The input voltage is 2.7-3.6V (typical: 3.3V). Its output v...

142

1.0

LDO regulator in SMIC 40nm, 2.1v output

The present IP is a low dropout voltage regulator, which can support 360uA current load. The input voltage is 2.7-3.6V (typical: 3.3V). Its output vol...

143

1.0

LDO regulator in SMIC 40nm, up to 12mA

The present IP is a low-dropout (LDO) voltage regulator supporting a 12mA load current with an input voltage range of 2.7V to 3.6V (typical: 3.3V). It...

144

1.0

LDO regulator in SMIC 65nm, capless

The present IP is a low-dropout (LDO) and capacitor-less voltage regulator developed using SMIC's 65nm ETOX Nor Flash process. It generates adjustable...

145

1.0

Reference Voltage Generator, 1V Output, 2.5V external reference

Reference Voltage Generator, 1V Output, 2.5V external reference...

146

1.0

Regulator, 10mA, 1.8V - XFAB 180nm

Regulator, 10mA, 1.8V - XFAB 180nm...

147

1.0

Regulator, 50mA, 2.5V - IHP 250nm SiGe

Regulator, 50mA, 2.5V - IHP 250nm SiGe...